Electron Microscopes
Ted Pella Inc Carbon Film only on 200 mesh, Copper, 25/pk
Carbon films with a thickness of 15-25nm with no Formvar used during manufacturing. Completely free of Formvar. Carbon films are thin and highly transparent to electrons. They exhibit very fine grain and minimal interference with specimen structure. Films are ready to use upon receipt. The pure carbon films tend to be more delicate than support films with a Formvar backing and require more delicate handling during specimen preparation.
Simpore Inc 50 nm thick Non-porous Silicon Nitride100×100 µm single window2.9 mm diameter + 0.1 mm thick chip framePack of 10
50 nm thick Non-porous Silicon Nitride100×100 µm single window2.9 mm diameter + 0.1 mm thick chip framePack of 10
Simpore Inc 15 nm thick Non-porous Amorphous Silicon(8) 100x100 µm + (1) 100x350 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
15 nm thick Non-porous Amorphous Silicon(8) 100x100 µm + (1) 100x350 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
Simpore Inc 25 nm thick Non-porous <1-0-0> Crystal Silicon(8) 50x50 µM + (1) 50x100 µm windows2.9 mm diameter + 0.1 mm thick chip framePack of 10
25 nm thick Non-porous <1-0-0> Crystal Silicon(8) 50x50 µM + (1) 50x100 µm windows2.9 mm diameter + 0.1 mm thick chip framePack of 10
Simpore Inc 9 nm thick Non-porous Amorphous Silicon(8) 100x100 µm + (1) 100x350 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
9 nm thick Non-porous Amorphous Silicon(8) 100x100 µm + (1) 100x350 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Hexagonal 200 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Surface 9-Division, 1/4" height
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Gilder F3 Finder Nickel Grid
A thin film of pure carbon coats the shiny side of a Gilder Finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Nickel
Electron Microscopy Sciences Formvar Support Film 5-6 nm thick on Gilder F1 Finder Copper Grid
A thin film of pure formvar resin coats the shiny side of a Gilder Finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Standard coating is 5 to 6 nm thick.
Grid: Copper
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on 2X0.5 mm Slot Grid Gold Grid
A thin film of pure carbon deposited on one side of the slot grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Gold
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Square 300 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences SEM Pin Stub Holder 12 3.2 x 8mm Pin Stubs
This 62 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with stainless steel Allen wrench screws. It accommodates up to twelve standard 12.7 mm (1/2") pin stubs
Type: 3.2 mm x 8mm Pin
Electron Microscopy Sciences Metallurgical Mount Holder 1" and 30 mm, 3.2 mm x 8mm Pin
This mount holder which is made from machined aluminum with stainless steel Allen screws. Desgned specifically for use with 1 1/4" and 30 mm metallurgical mounts.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Multi Holder for 8 Pin Stubs, 3.2 mm x 8mm Pin
This 50 mm in diameter multi pin holder is designed to save time.It is made from machined aluminum with stainless steel Allen wrench screws. It accommodates up to eight standard 12.7 mm (1/2") pin stubs.
Type: 3.2 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 70 µm hole, 3 mm O.D., 0.165 mm thick
O.D.: 3 mm
Thickness: 0.165 mm